湖南电力 ›› 2022, Vol. 42 ›› Issue (4): 50-55.doi: 10.3969/j.issn.1008-0198.2022.04.010

• 新技术及应用 • 上一篇    下一篇

核电汽轮机低压缸揭缸技术研究与工程应用

刘金伟1, 刘剑1, 李德波2   

  1. 1.广东中广核集团有限公司,广东 广州 510080;
    2.南方电网电力科技股份有限公司,广东 广州 510080
  • 收稿日期:2022-05-05 出版日期:2022-08-25 发布日期:2022-10-14
  • 作者简介:刘金伟(1975),男,辽宁人,学士,工程师,主要从事核电工程施工与技术管理工作。刘剑(1986),男,内蒙古人,学士,高级工程师,主要从事核电常规岛施工与技术管理工作。李德波(1983),男,湖北宜昌人,博士,教授级高级工程师,研究方向为燃煤耦合生物质掺烧理论,数值模拟和现场实验,超超临界锅炉调试、试验和技术监督,煤粉燃烧高级数值模拟,大规模并行计算方法和程序开发等。
  • 基金资助:
    国家自然科学基金重点项目(51376161)

Research and Engineering Application of Low Pressure Cylinder Uncovering Technology for Nuclear Power Steam Turbine

LIU Jinwei1, LIU Jian1, LI Debo2   

  1. 1. Guangdong CGN Group Co., Ltd., Guangzhou 510080,China;
    2. Southern Power Grid Electric Power Technology Co., Ltd., Guangzhou 510080,China
  • Received:2022-05-05 Online:2022-08-25 Published:2022-10-14

摘要: 某核电机组汽轮机安装现场揭缸作业期间,进行了低低轴系中心与基础弹簧测量试验、通流间隙与碰缸实验、汽缸下挠量校正试验、末级页片径向找中试验,并对试验过程数据进行分析,试验结论为后续同类型汽轮机揭缸和设备安装工作提供参考。

关键词: 核电汽轮机, 低压缸, 揭缸, 对轮中心, 通流间隙

Abstract: In view of the field uncovering operation of steam turbine of a nuclear power unit, the center of low and low pair wheels and the clearance of flow through half cylinder are measured, and the data of the test process are analyzed, the test results provide reference for the following work of uncovering cylinder and equipment installation of the same type of steam turbine.

Key words: nuclear power turbine, low pressure cylinder, uncovering the cylinder, coupling center, flow gap

中图分类号: