湖南电力 ›› 2024, Vol. 44 ›› Issue (1): 128-135.doi: 10.3969/j.issn.1008-0198.2024.01.018

• 故障与分析 • 上一篇    下一篇

基于改进沙丘猫群算法优化支持向量机的高压断路器故障诊断

黄伟1, 张莲1, 王士彬2, 赵娜1, 季鸿宇1   

  1. 1.重庆理工大学电气与电子工程学院,重庆 400054;
    2.国网重庆市电力公司市南供电分公司,重庆 401336
  • 收稿日期:2023-09-01 修回日期:2023-10-11 出版日期:2024-02-25 发布日期:2024-03-11
  • 通信作者: 张莲(1967),女,硕士,教授,从事电力系统故障诊断、信号处理研究工作。
  • 作者简介:黄伟(1998),男,硕士研究生在读,从事高压断路器在线检测与故障诊断研究工作。
  • 基金资助:
    国家社会科学基金项目(21BJL098)

Fault Diagnosis of High Voltage Circuit Breakers Based on Support Vector Machine of Improverd Sand Cat Swarm Optimization Algorithm

HUANG Wei1, ZHANG Lian1, WANG Shibin2, ZHAO Na1, JI Hongyu1   

  1. 1. School of Electrical and Electronic Engineering, Chongqing University of Technology, Chongqing 400054, China;
    2. State Grid Chongqing Electric Power Company Shinan Power Supply Branch, Chongqing 401336, China
  • Received:2023-09-01 Revised:2023-10-11 Online:2024-02-25 Published:2024-03-11

摘要: 为了更加准确地对高压断路器的状态进行分析与故障诊断,提出一种多策略改进沙丘猫群优化(improverd sand cat swarm optimization,ISCSO)算法优化支持向量机(support vector machine,SVM)的故障诊断方法。首先,通过多种改进策略对沙丘猫群优化(sand cat swarm optimization,SCSO)算法进行改进,提高算法的全局搜索能力、局部搜索能力及平衡全局的能力,并利用两种不同类型的测试函数对ISCSO进行性能测试,验证了其具有更强的收敛性和寻优能力。然后,采用ISCSO优化SVM,建立故障诊断模型。接着,用完全自适应噪声集合经验模态分解能量熵对振动信号进行特征提取并构建特征样本集。最后,将提取到的特征样本集输入到ISCSO-SVM模型中,对高压断路器进行故障诊断。实验结果表明,该方法的诊断准确率达到了96.29%,与其他三种模型对比实验,证明了该方法具有更高的准确率及更好的稳定性。

关键词: 高压断路器, 故障诊断, CEEMDAN能量熵, ISCSO, 支持向量机

Abstract: In order to analyze and diagnose the status of high-voltage circuit breakers more accurately, a multi-strategy improved sand cat swarm optimization (ISCSO) algorithm is proposed to optimize the fault diagnosis method of support vector machine (SVM). Firstly, sand cat swarm optimization(SCSO) algorithm is improved through various improvement strategies to enhance the algorithm's global search ability, local search ability, and global balance ability. Two different types of test functions are used to test the performance of ISCSO, verifying its stronger convergence and optimization ability. Then, ISCSO is used to optimize SVM and establish a fault diagnosis model. Next,complete ensemble empirical mode decompasition with adaptive noise energy entropy is used to extract features from vibration signals and construct a feature sample set. Finally, the extracted feature sample set is input into the ISCSO-SVM model for fault diagnosis of high-voltage circuit breakers. The experimental results show that the diagnostic accuracy of this method reaches 96.29%. Compared with the other three models, it has been proven that this method has higher accuracy, and better stability.

Key words: high-voltage circuit breaker, fault diagnosis, CEEMDAN energy entropy, ISCSO, support vector machine

中图分类号: