湖南电力 ›› 2026, Vol. 46 ›› Issue (3): 46-52.doi: 10.3969/j.issn.1008-0198.2026.03.006

• 电网运行与控制 • 上一篇    下一篇

基于多源异构数据的配电网带电作业机器人智能故障诊断方法

李世皎1, 李昊洋2, 林德政1, 任青亭1, 史成亮1, 尹学伟1   

  1. 1.国网瑞嘉(天津)智能机器人有限公司,天津 300480;
    2.东南大学机械工程学院,江苏 南京 211189
  • 收稿日期:2025-12-11 修回日期:2026-01-09 出版日期:2026-06-25 发布日期:2026-07-07
  • 通信作者: 林德政(1978),男,高级工程师,主要从事配电网带电作业机器人的研究工作。
  • 作者简介:李世皎(1990),男,硕士,主要从事配电网带电作业机器人的研究工作。
  • 基金资助:
    国网瑞嘉(天津)智能机器人有限公司科技项目(52460G250002)

Intelligent Fault Diagnosis Method of Live Working Ro‍bots for Distribution Networks Based on Multi-Source Heterogeneous Data

LI Shijiao1, LI Haoyang2, LIN Dezheng1, REN Qingting1, SHI Chengliang1, YIN Xuewei1   

  1. 1. State Grid Ruijia (Tianjin) Intelligent Robot Co.,Ltd., Tianjin 300480, China;
    2. School of Mechanical Engineering, Southeast University, Nanjing 211189, China
  • Received:2025-12-11 Revised:2026-01-09 Online:2026-06-25 Published:2026-07-07

摘要: 针对配电网带电作业机器人无法进行预警、避免故障及故障后维护响应滞后的问题,提出多源异构数据融合与三级诊断模型的智能故障诊断方法。通过机器人各部件时钟同步,构建时空同步采集机制以获取多源数据;结合卡尔曼滤波与模糊逻辑的动态自适应加权融合算法,消除数据异构性与时空偏差;通过构建三级诊断模型,实现故障预警与维护方案生成。实验表明,故障发生的概率减少90%,故障恢复时间缩短至9 s,人工恢复故障时间缩短至1 min,隐患部件推送维护计划避免了故障的发生,有效提升了机器人运行可靠性与可维护性。

关键词: 配电网带电作业机器人, 智能故障诊断, 多源异构数据融合, 三级诊断模型, 时钟同步

Abstract: Aiming at the problems that distribution network live working robots cannot predict, prevent faults, and the maintenance response is delayed after faults occur, an intelligent fault diagnosis method based on multi-source heterogeneous data fusion and a three-level diagnosis model is proposed. Through clock synchronization of each component of the robot, a spatiotemporal synchronization acquisition mechanism is constructed to obtain multi-source data. A dynamically adaptive weighted fusion algorithm combining Kalman filtering and fuzzy logic is adopted to eliminate data heterogeneity and spatiotemporal deviations. By establishing the three-level diagnosis model, fault prediction and maintenance scheme generation are realized. Experimental results show that fault prediction reduces the probability of faults by 90%, automatic recovery shortens the fault recovery time to 9s, and the generation of maintenance schemes reduces the manual fault recovery time to 1min, pushing maintenance plans for potential hazard components avoids the occurrence of faults, which effectively improves the operational reliability and maintainability of the robot.

Key words: distribution network live working robot, intelligent fault diagnosis, multi-source heterogeneous data fusion, three-level diagnosis model, clock synchronization

中图分类号: