A New Method of Ground Parameter Measurement and Grounding Fault Sensitive Perception for Distribution Network Based on Feeder Power

doi:10.3969/j.issn.1008-0198.2023.01.009

Abstract

Abstract: Aimed at the errors in modeling and principle of traditional measurement methods for grounding parameters, an accurate measurement method for grounding parameters of neutral ungrounded distribution network based on feeder power is proposed. By adding a controllable voltage source to the neutral point to regulate the zero sequence voltage, the active and reactive power of each feeder line is obtained, and combining the relationship between feeder line power and grounding parameters, the accurate measurement of the conductance and capacitance parameters of each feeder and system to ground are achieved. Furthermore, a sensitive sensing method of single-phase grounding fault based on feeder power is proposed, which can accurately identify whether the bus and feeder of distribution network are in fault through the difference of power factor angle characteristics between fault and normal feeder. This method can effectively solve the measurement problem of system to ground parameters, realize the sensitive sensing of single-phase ground fault, and accurately distinguish the bus and feeder faults based on the mathematical relationship between feeder power and ground parameters, power factor angle. The proposed method is simulated and verified in PSCAD/EMTDC simulation environment and 10kV real distribution network experimental field. The analysis results show that the method has high measurement accuracy, strong fault perception ability and certain engineering application value.

Key words: distribution network;grourd parameters;fault perception;grounding fault;feeder power

CLC Number:

TM934

HE Shigeng, YANG Libin, YU Kun, ZENG Xiangjun, OUYANG Fan. A New Method of Ground Parameter Measurement and Grounding Fault Sensitive Perception for Distribution Network Based on Feeder Power[J]. Hunan Electric Power, 2023, 43(1): 50-57.

References 20

[1]	曾祥君,王媛媛,李健,等.基于配电网柔性接地控制的故障消弧与馈线保护新原理[J].中国电机工程学报,2012,32(16):137-143.
[2]	刘宝稳,曾祥君,张慧芬,等.有源柔性接地配电网弧光高阻接地故障检测方法[J].中国电机工程学报,2022,42(11):4001-4013.
[3]	郭谋发,陈静洁,张伟骏,等.基于单相级联H桥变流器的配电网故障消弧与选线新方法[J].电网技术,2015,39(9):2677-2684.
[4]	李辉,陈江波,陈维江,等.基于真型试验平台的配电网柔性消弧实证测试研究[J].供用电,2021,38(4):85-92.
[5]	Wang P, Chen B C,Tian C H, et al.A Novel Neutral Electromagnetic Hybrid Flexible Grounding Method in Distribution Networks[J].IEEE Transactions on Power Delivery, 2017,32(3):1350-1358.
[6]	李晓波,苗晓鹏,桑振华,等.基于偏置阻抗法的配电网电容电流测量新方法[J].电力系统保护与控制,2014,42(4):22-26.
[7]	赵国栋,梁睿,江夏进.一种附加阻抗法在测量配电网对地参数中的应用[J].电测与仪表,2014,51(8):65-68.
[8]	宋晓燕,孙岩洲,宋紫嫣,等.基于零序PT二次侧注入信号的配电网电容电流测量新方法[J].电力系统保护与控制,2014,42(19):134-138.
[9]	林凌,刘明光.基于变频信号法的一种对地电容电流检测系统[J].电力系统保护与控制,2014,42(23):44-49.
[10]	曾祥君,许瑶,陈博,等.中性点不接地配电网电容电流实时测量新方法[J].电力系统自动化,2009,33(2):78-81,91.
[11]	曾祥君,杨先贵,王文,等.基于零序电压柔性控制的配电网铁磁谐振抑制方法[J].中国电机工程学报,2015,35(7):1666-1673.
[12]	束洪春.配电网络故障选线[M].北京:机械工业出版社,2008.
[13]	齐郑,董迪,杨以涵.中性点不接地系统铁磁谐振与单相接地辨识技术[J].电力系统自动化,2010,34(1):55-58,83.
[14]	曾祥君,黄明玮,王文,等.配电网三相不平衡过电压有源抑制方法研究[J].电工技术学报,2015,30(9):61-69.
[15]	曾祥君,胡京莹,王媛媛,等.基于柔性接地技术的配电网三相不平衡过电压抑制方法[J].中国电机工程学报,2014,34(4):678-684.
[16]	宗剑,牟龙华,张鑫,等.配电网单相接地故障类型及程度的判据[J].电力系统及其自动化学报,2004,16(4):27-29.
[17]	Benmouyal G, Mahseredjian J. A combined directional and faulted phase selector element based on incremental quantities[J]. IEEE Transactions on Power Delivery, 2001, 16(4): 478-484.
[18]	耿建昭,王宾,董新洲,等.中性点有效接地配电网高阻接地故障特征分析及检测[J].电力系统自动化,2013, 37(16):85-91.
[19]	Deepak Paliwal, Achintya Choudhur, T. Govandhan. Identification of faults through wavelet transform vis-à-vis fast Fourier transform of noisy vibration signals emanated from defective rolling element bearings[J]. Frontiers of Mechanical Engineering, 2014,9(2):130-141.
[20]	R. Peña-Alzola R,Sztykiel M,Jones c e, et al. First-Fault Detection in DC Distribution With IT Grounding Based on Sliding Discrete Fourier-Transform[J]. IEEE Transactions on Power Electronics,2021,36(4):3649-3654.