Research on Hoisting Scheme of Special-Shaped Components in UHV Tower Assembly Process

doi:10.3969/j.issn.1008-0198.2024.01.014

Hunan Electric Power ›› 2024, Vol. 44 ›› Issue (1): 101-105.doi: 10.3969/j.issn.1008-0198.2024.01.014

• Experience and Discussion • Previous Articles Next Articles

Research on Hoisting Scheme of Special-Shaped Components in UHV Tower Assembly Process

JIN Yuzhu¹, REN Caiheng¹, GUI Hehuai¹, ZHU Guanmin¹, WANG Shuang^2,3, MA Tianyuan^2,3, TANG Bo^2,3

1. Anhui Electric Power Transmission ＆ Transformation Co., Ltd., Anhui 230036, China;
2. School of Electrical and New Energy, China Three Gorges University, Yichang 443002, China;
3. Hubei Provincial Engineering Technology Research Center for Power Transmission Line (China Three Gorges University), Yichang 443002, China

Received:2023-11-15 Revised:2023-12-14 Online:2024-02-25 Published:2024-03-11

Abstract

Abstract: In order to provide technical support for the formulation of the hoisting scheme of special shaped components in the erection of UHV transmission towers, this paper takes a large-span single circuit cup-shaped spanning tower as the research object, and uses the structural analysis software Tekla Structure to model some special-shaped components of the tower. The gravity center position of the special-shaped component is calculated, and the hoisting scheme of the special-shaped component is proposed. In order to verify the feasibility of the scheme, the finite element analysis is carried out by using ANSYS software. The analysis results show that the strength of the steel pipe at the counterweight after the component is split meets the requirements, and the hoisting scheme is safe and feasible. It can improve the efficiency of the tower construction ,ensure the safety of the construction,and provide reference for the formulation of the hoisting scheme of the special-shaped components of the UHV transmission tower.

Key words: transmission tower, special-shaped component, hoisting scheme, finite element simulation

CLC Number:

TM754

JIN Yuzhu, REN Caiheng, GUI Hehuai, ZHU Guanmin, WANG Shuang, MA Tianyuan, TANG Bo. Research on Hoisting Scheme of Special-Shaped Components in UHV Tower Assembly Process[J]. Hunan Electric Power, 2024, 44(1): 101-105.

References

[1] 张卓群,李宏男,李士锋,等. 输电塔-线体系灾变分析与安全评估综述[J]. 土木工程学报, 2016,49(12):75-88.
[2] 雷勇. 老旧输电杆塔结构安全性分析[D]. 南京:东南大学, 2019.
[3] 杜伟. 高压输电铁塔结构强度和稳定性分析与加固[D]. 合肥:合肥工业大学, 2014.
[4] 杜伟,罗正帮,杨雪峰,等. 高压输电铁塔结构强度和稳定性分析与加固[J]. 合肥工业大学学报(自然科学版), 2015,38(1):69-74.
[5] 吴凡,史跃,黄成云,等. 双平臂抱杆与特高压输电线路塔耦合结构力学性能分析[J]. 钢结构, 2016,31(3):59-61.
[6] 刘江松,胡宗军,牛忠荣. 自立式输变电塔架稳定性分析与加固[J]. 工程与建设, 2014, 28(1): 5-7.
[7] 冯超,乔磊,李伟,等. 某500 kV架空老旧线路拉V塔结构优化设计研究[J]. 湖南电力, 2020,40(6):77-80.
[8] 方林,蒋晓琳,周庆丰,等. 基于改进天鹰优化器的抱杆结构优化[J]. 科学技术与工程, 2023, 23(27):11759-11767.
[9] 陶然,周焕林,孟增,等. 基于响应面法和改进算术优化算法的抱杆优化设计[J]. 应用数学和力学, 2022, 43(10):1113-1122.
[10] TAHERI F, GHASEMI M R, DIZANGIAN B. Practical optimization of power transmission towers using the RBF-based ABC algorithm[J]. Structural Engineering And Mechanics, 2020, 73(4):463-479.
[11] KHODZHAIEV M, REUTER U. Structural optimization of transmission towers using a novel genetic algorithm approach with a variable length genome[J]. Engineering Structures, 2021, 240:112306.
[12] 向玲,郭曦煜,唐亮,等. 高压输电铁塔及塔-线体系的耦合振动特性分析[J]. 中国工程机械学报, 2018, 16(6): 513-519.
[13] 丁志敏,补黔江,王德忠,等. 特高压钢管塔及塔线耦合体系动态性能研究[J]. 电气开关, 2020, 58(4):38-43.
[14] LIANG H B, XIE Q, BU X H, et al. Shaking table test on 1000 kV UHV transmission tower-line coupling system[J]. Structures, 2020, 27: 650-663.
[15] 卢银均,刘闯,陈克勇,等. 高压输电线路塔线体系动力学分析[J]. 黑龙江电力, 2021, 43(3): 257-262.
[16] 伍川,杨晓辉,赵鹏飞,等. 基于塔线体系的风荷载作用下输电铁塔薄弱杆件分析[J]. 中国工程机械学报, 2022, 20(6): 504-509.
[17] XIE Q, CAI Y, XUE S. Wind-induced vibration of UHV transmission tower line system: wind tunnel test on aero-elastic model[J]. Journal of Wind Engineering and Industrial Aerodynamics, 2017, 171: 219-229.
[18] 李士锋,李宏男,张卓群,等. 强风荷载作用下输电线路的连续倒塌破坏分析[J]. 防灾减灾工程学报, 2017, 37(5): 835-841.
[19] HE B, ZHAO M X, FENG W T, et al. A method for analyzing stability of tower-line system under strong winds[J]. Advances in Engineering Software, 2019, 127: 1-7.
[20] 管金亮,刘庆,孙宇,等. 钢结构重量重心计算新方法[C]//2010全国钢结构学术年会论文集.中国钢结构协会,国家钢结构工程技术研究中心,中治建筑研究总院有限公司,工业建筑杂志社, 2010: 310-312.
[21] 左学兵,雷翔栋. 山东海阳核电站大型结构模块吊装重心计算及配平[J]. 施工技术,2012,41(15):29-31, 73.
[22] 刘玉杰. 750 kV铁塔组立结构重心计算方法研究[J]. 电力建设, 2008,29(1):22-24.

Research on Hoisting Scheme of Special-Shaped Components in UHV Tower Assembly Process

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 1

Recommended Articles

Metrics

Comments