[1] |
陈昊. 基于广义自回归条件异方差模型的负荷预测新方法[J]. 电力系统自动化, 2007,31(15): 51-54,105.
|
[2] |
栗然, 陆凤怡, 徐宏锐, 等. 基于局域波与近似熵的负荷分析方法[J]. 中国电机工程学报, 2010, 30(25): 51-58.
|
[3] |
于玉泽, 覃剑, 李功新, 等. 电缆—架空线混合线路故障测距方法综述[J]. 电网技术, 2006,30(17): 64-69.
|
[4] |
陈昊, 王玉荣, 周永荣. 考虑线路参数非线性的零序电流增益分析[J]. 中国电力, 2014, 47(1): 35-38.
|
[5] |
牛睿, 梁军, 贠志皓, 等. 基于故障距离区间的混联线路单端行波测距[J]. 电网技术, 2015, 39(1): 156-163.
|
[6] |
邓丰, 李欣然, 曾祥君. 基于全波形信息的混联线路单端行波定位方法[J]. 电工技术学报, 2018, 33(15): 3471-3485.
|
[7] |
王博, 谷昌瑞, 吉晓筱, 等. 基于多点故障行波检测的改进分布式故障测距方法研究[J]. 电力工程技术, 2017, 36(5): 120-127.
|
[8] |
陈启锐. 基于双端行波的T型线路故障定位方法[J]. 湖南电力, 2019, 39(4): 14-18.
|
[9] |
侯丽钢, 汤向华, 江辉, 等. 应用于含有线-缆混合线路配电网的行波故障测距新方法[J]. 电力工程技术, 2019, 38(2): 111-116.
|
[10] |
李澄, 袁磊平, 严慧, 等. 基于函数幅值和线路等分法的双端故障定位研究[J]. 电力工程技术, 2018, 37(4): 126-131.
|
[11] |
王涛, 李澄. 一种混合输电线路故障测距新方法[J]. 江苏电机工程, 2015, 34(5): 17-20,24.
|
[12] |
李跃, 郑涛, 文安. 基于单端量的超高压交流输电线路单相接地故障测距方法研究[J]. 电力系统保护与控制, 2020, 48(6): 27-33.
|
[13] |
李澄, 鲍有理, 黄瑜, 等. 不受线路参数变化影响的故障测距原理研究[J]. 江苏电机工程, 2016, 35(5): 67-70.
|
[14] |
张斯淇, 李永丽, 陈晓龙. 基于故障区域快速识别的混合线路故障测距新原理[J]. 电力自动化设备, 2018, 38(10): 166-171,183.
|
[15] |
彭浩, 沈兴来, 陈奎. 电缆单端故障测距的阻抗-行波组合法[J]. 电力系统保护与控制, 2016, 44(23):110-114.
|
[16] |
张建文, 周鹏, 陈焕栩. 基于改进阻抗法的单相接地故障测距仿真[J]. 电测与仪表, 2018, 55(3): 84-87.
|
[17] |
陈昊, 李颖, 张钊, 等. 单相接地故障时零序电流增益分析[J]. 现代电力, 2013, 30(5): 46-49.
|
[18] |
洪佩孙,李九虎. 输电线路距离保护[M] . 北京:中国水利水电出版社,2008.
|
[19] |
张保会, 尹项根. 电力系统继电保护[M] . 北京: 中国电力出版社, 2010.
|
[20] |
邓星. 同杆并架线路继电保护与故障测距新技术研究[D] . 武汉:华中科技大学, 2012.
|