[1] 周诗嘉,杨光源,彭光强,等.基于18相风力发电系统的最大功率跟踪控制策略研究[J].湖南电力,2021,41(5):14-21. [2] Frede Blaabjerg,Marco Liserre, Ke Ma. Power Electronics Converters for Wind Turbine Systems[J]. IEEE Transactions on Industry Applications, 2011, 48(2):708-719. [3] 刘飞,高海祐,刘文君,等.部分能量输入的三端口六边形MMC功率分析及环流控制[J].中国电机工程学报,2019,39(20):6056-6064,6186. [4] 王要强,原博,刘文君,等.九边形MMC单端口断路故障下等效六边形MMC控制[J/OL].高电压技术:1-15(2021-09-22)[2022-06-30].DOI:10.13336/j.1003-6520.hve.20210933. [5] Lennart Baruschka,Axel Mertens. A new three-phase AC/AC modular multilevel converter with six branches in hexagonal configuration[J]. IEEE Transactions on Industry Applications,2013,49(3): 1400-1410. [6] 荣飞,严家俊,孙文隆,等.基于H-MMC的直驱式永磁同步风力发电系统的运行与控制[J].电力自动化设备,2020,40(1):38-45. [7] 张书诚. MMC子模块开路故障诊断研究[D].昆明:昆明理工大学,2020. [8] 邹毅军,魏明洋.模块化多电平换流器子模块故障模拟方法[J].电气技术,2022,23(4):96-101. [9] 刘方艳. MMC子模块开路故障诊断与容错控制研究[D].贵阳:贵州大学,2021. [10] 姜斌,龚雁峰,李岩.模块化多电平换流器子模块短路故障分析、检测与定位方法[J].南方电网技术,2019,13(3):73-78,88. [11] 毕恺韬,安群涛,孙东阳,等.基于子模组工况分析的模块化多电平储能系统开路故障诊断方法[J].电工技术学报,2018,33(6):1219-1226. [12] 尹桥宣,段斌,沈梦君,等.模块化五电平逆变器子模块开路故障的智能诊断方法[J].电力系统自动化,2018,42(12):127-133,147. [13] 杨桢,马子莹,李鑫.基于WPD-PCA与GA-BP的MMC子模块故障定位方法研究[J].电子测量与仪器学报,2019,33(7):181-187. [14] 谢东,葛兴来.基于残差变化率的单相级联H桥整流器IGBT开路故障诊断[J].电工技术学报,2018,33(16):3822-3834. [15] 徐坤山,谢少军.基于增量预测模型的MMC子模块功率管开路故障检测方法[J].中国电机工程学报,2018,38(21):6420-6429,6504. [16] 刘玉林,齐静静,李家宁,等.一种基于桥臂电流畸变及自适应观测的MMC子模块开路故障诊断定位方法[J].电源学报,2020,18(3):106-115. [17] 殷实,谭国俊.一种基于扩展卡尔曼滤波算法的MMC系统故障诊断策略[J].电工技术学报,2016,31(19):74-84. [18] 罗朋,李一峰,夏正龙,等.利用粒子群优化最小二乘支持向量机诊断H桥功率模块IGBT故障[J].电力电容器与无功补偿,2018,39(2):26-31. [19] 于生宝,何建龙,王睿家,等.基于小波包分析和概率神经网络的电磁法三电平变换器故障诊断方法[J].电工技术学报,2016,31(17):102-112. [20] 彭冠炎.基于MMC技术柔性直流输电系统调制策略选择方法[J].湖南电力,2015,35(6):6-9. |