Heat Dissipation Optimization Design for Outdoor Box Capacitors

doi:10.3969/j.issn.1008-0198.2023.04.012

Abstract

Abstract: Outdoor box capacitors often encounter problems such as uneven temperature, water leakage at the inlet and outlet, and dust blockage in traditional left and right ventilation and heat dissipation methods in rainy, snowy, cold, or high-temperature environments. A heat dissipation scheme for side inlet and top outlet air is design based on the internal configuration and heat dissipation requirements of box capacitors. By optimizing the number and position of air inlet and outlet, fans and installing guide plates at the air inlet, the internal components meet the heat dissipation requirements at an ambient temperature of 55 ℃, and the box body meets the structural protection requirements of IP54. The actual operation effect of this scheme is good, providing a reference for the heat dissipation design of box capacitors.

Key words: box heat dissipation design, air cooling, protection, filter

CLC Number:

TM714.3

ZHANG Yuan, WANG Shuo. Heat Dissipation Optimization Design for Outdoor Box Capacitors[J]. Hunan Electric Power, 2023, 43(4): 85-89.

References 19

[1]	于建军.箱式变电站的特点及应用探讨[J].变压器,2017,54(8):37-39.
[2]	王和忠.箱式变新型无功补偿装置中智能集成电力电容器的应用[J].变压器,2009,46(3):37-39.
[3]	张志毅,全凤岐.变电站10 kV SVQC无功补偿与电压优化成套装置[J].电力电容器与无功补偿,2013,34(4):7-10,50.
[4]	Patankar G,Mancin S,Weibel J A,et al.A method for thermal performance characterization of ultrathin vapor chambers cooled by natural convection[J].Journal of Electronic Packaging,2016,138(1):010903.
[5]	李辉,毛文奇,潘华,等.户外智能汇控柜双TEC空调设计与实现[J].湖南电力,2019,39(2):1-6.
[6]	吴雪峰,刘艳敏,施战辽,等.数字化变电站智能终端柜降温方案[J]. 水电能源科学,2012,30(5):158-160.
[7]	张琰佳,李强.某风冷机箱的优化设计与分析[J].电子机械工程,2017,33(3):29-35.
[8]	张辉.某机载雷达风冷机箱设计研究[D].南京:南京理工大学,2013.
[9]	杨世铭, 陶文铨. 传热学[M].4版.北京: 高等教育出版社,2006.
[10]	王福军.计算流体动力学分析:CFD软件原理与应用[M].北京:清华大学出版社,2004.
[11]	唐敖,向华平.某机载雷达的热设计及仿真优化[J].电子机械工程,2011,27(2):20-22.
[12]	余建祖,高红霞,谢永奇.电子设备热设计及分析技术[M].2版.北京:北京航空航天大学出版社,2008.
[13]	李辉,刘海峰,陈宏,等.户外智能高压汇控柜温度影响因数及温湿度控制分析[J].高电压技术,2015,41(S2):83-87.
[14]	《电子设备机箱·机柜·控制台设计手册》编委会.电子设备机箱·机柜·控制台设计手册[M].1版.北京:化学工业出版社,2012.
[15]	吕家森.强迫风冷下舰载机柜散热的设计与计算[J].通信与广播电视,2001(3):57-61.
[16]	廖明.电气柜内发热元件热设计数值模拟研究[D].南京:南京航空航天大学,2012.
[17]	余涛,刘毅,张磊.基于气液热交换器的密闭机柜热设计[J].电子机械工程,2021 (3):17-21.
[18]	孙一坚.简明通风设计手册[M].北京:中国建筑工业出版社,1997.
[19]	郭龙.通信用一体化户外机柜结构设计要点[J].科技风,2018(16):65-65.