Multi-End Traveling Wave Fault Location Algorithm for Distribution Network Based on Path Search

doi:10.3969/j.issn.1008-0198.2022.01.008

Abstract

Abstract: The distribution network has complex structure, and mostly tree-shaped radial distribution.Many branches on the feeder and the network topology often changes. The traditional fault location method is difficult to apply to the accurate fault location of the distribution network. In this paper, a multi-end traveling wave fault location algorithm based on path search is proposed. Firstly, a new distribution network association matrix is constructed, which fully expresses the topology of the distribution network. Then the path search method is put forward. The shortest path between the end nodes and the route that passes through are arranged. Finally, the multi-terminal transient traveling wave information is comprehensively utilized to achieve accurate positioning of the distribution network. The simulation results show that the algorithm can quickly and accurately give the fault distance and the path search can realize the initial traveling wave propagation process in the distribution network.

Key words: distribution network, fault location, traveling wave, association matrix, path search

CLC Number:

TM762

YOU Jinliang, ZHANG Di, KANG Tong, ZHU Zheming. Multi-End Traveling Wave Fault Location Algorithm for Distribution Network Based on Path Search[J]. Hunan Electric Power, 2022, 42(1): 43-47.

References

[1] 刘志杰, 丁苏. 中低压配电网故障定位综述[J]. 电子世界, 2017(10): 184-186.
[2] 宋伊宁, 李天友, 薛永端,等. 基于配电自动化系统的分布式小电流接地故障定位方法[J]. 电力自动化设备, 2018(4): 102-109.
[3] 徐伟宗. 基于双端行波原理的辐射状配电线路故障测距[D]. 重庆:重庆大学, 2010.
[4] Salim R H,Resener M,Filomena A D,et al.Extended fault-location formulation for power distribution systems[J].IEEE Transactions on Power Delivery,2009,24(2): 508-516.
[5] 李国成, 王辉, 高盛,等. 基于故障距离分布函数的配电网故障定位方法研究[J]. 电子设计工程, 2017, 25(19): 34-37.
[6] 郑涛,潘玉美,郭昆亚,等.基于节点阻抗矩阵的配电网故障测距算法[J].电网技术,2013,37(11): 3233-3240.
[7] 李金洁. 基于脉冲注入法的电缆故障定位[D]. 保定:华北电力大学, 2014.
[8] 杜刚, 刘迅, 苏高峰. 基于FTU和“S”信号注入法的配电网接地故障定位技术的研究[J]. 电力系统保护与控制, 2010, 38(12): 73-76.
[9] 严凤, 杨奇逊, 齐郑,等. 基于行波理论的配电网故障定位方法的研究[J]. 中国电机工程学报, 2004, 24(9): 37-43.
[10] 贾惠彬, 李明舒, 张国云. 一种基于图论剪枝算法的多分支配电网行波故障定位算法[J]. 电测与仪表, 2017, 54(1): 27-32.
[11] 王阳, 曾祥君, 黎锐烽,等. 基于图论的配电网故障行波定位新算法[J]. 电力系统自动化, 2012, 36(18): 143-147.
[12] 张威. 10 kV配电网行波故障定位方案研究[D]. 淄博:山东理工大学, 2015.
[13] 贾惠彬, 赵海锋, 方强华,等. 基于多端行波的配电网单相接地故障定位方法[J]. 电力系统自动化, 2012, 36(2): 96-100.
[14] 杨毅, 曾祥君, 徐舜,等. 基于分布式行波检测的配电网单相接地故障定位方法[J]. 电测与仪表, 2015, 52(5): 59-63.
[15] 曹晶, 曾祥君, 杨毅,等. 单-多端行波组合的架空线配电网单相接地故障定位方法[J]. 电测与仪表, 2015, 52(16): 32-37.
[16] 刘晓琴, 王大志, 江雪晨,等. 利用行波到达时差关系的配电网故障定位算法[J]. 中国电机工程学报, 2017, 37(14): 4109-4115.