[1]郑雅轩.断路器断口并联电容引起谐振的防止[J].山西电力,2002(4):56-57,59. [2]彭成, 王振, 骆常璐,等. 均压电容器及使用该均压电容器的灭弧室:201811360748.7[P].2020-05-22. [3]李述冰.高压断路器均压电容的作用与改进措施[J].东北电力技术,2000(11):19-22. [4]陈守聚.开关断口均压电压电容与铁磁谐振[J].高电压技术,1987(4):43-47. [5]陈昊,马兆兴,吴司颖,等.基于变权重的断路器健康状态综合评估方法[J].湖南电力,2022,42(3):20-24. [6]姚聪伟,李盈,庞小峰,等.500kV断路器均压电容器10kV介损异常现象的研究与探讨[J].电力电容器与功,2021,42(6):101-109. [7]陈积会.变电站500 kV均压电容器介质损耗超标的原因分析[J].山东工业技术,2016(19):141-142. [8]戚科孙,刘春涛,黄学民,等.一起断路器断口电容介损异常的分析[J].电工技术,2019(5):130-131,133. [9]徐鹏,赵文翰,盛智蕾,等.Garton效应对介损测试的影响及对策[J].电力电容器与无功补偿,2020,41(1):118-122. [10]何杰,吕永红,王四保,等.500 kV断路器均压电容器介质损耗超标分析[J].中国电力,2011,44(5):34-37,64. [11]刘振.550kV断路器用并联电容Garton效应的研究[J].今日制造与升级,2021(5):71-73,76. [12]杨贤,马志钦,付一丁,等.Garton效应对电容式电压互感器介损测量影响研究[J].变压器,2018,55(5):52-55. [13]罗浪,赵海涛.500kV开关断口间并联电容器高压介损问题分析[J].机电信息,2014(30):45,47. [14]林育锦.电容式电压互感器介损现场测试方法浅析[J].电力电容器与无功补偿,2011,32(4):53-56. [15]李献东.电容式电压互感器介损的现场测试方法[J].电力电容器,2004(4):30-33. [16]黄江岸,张欢,张进,等.高压断路器断口电容介损数据异常的分析与检修策略制定[J].电力电容器与无功补偿,2018,39(5):60-63,69. [17]王娜,张浩,戴通令,等.影响高压断路器用均压油纸电容器绝缘性能的因素[J].高压电器,2020,56(4):229-234. [18]戴昌彬,王祖林,洪贞贤.膜纸复合绝缘电容器介质损耗测量及标准的讨论[J].绝缘材料,2001(5):38-41. [19]高子杰,石明垒,赵轶帆.一起交流滤波器断路器均压电容介损值异常变化问题的探讨[J].山东工业技术,2019(2):195-196. [20]钱国超,邹德旭,周仿荣,等.断路器断口均压电容测试方法分析与比较[J].高压电器,2015,51(8):141-145,151. [21]陈伟,夏谷林,彭翔,等.断路器并联电容器现场高压介损测量研究[J].高压电器,2012,48(8):50-55. [22]王少华,方玉群.Garton效应及其对容性设备高压介损测量的影响[J].电工电气,2011(9):51-53. [23]刘旭.高电压介损测量在并联电容器状态诊断中的应用[J].云南电力技术,2014,42(S1):92-94. [24]徐亮,冯玉柱,冯新岩,等.克服Garton效应的高压介损现场试验方法[J].高压电器,2012,48(2):66-70. [25]杨洋,许强,陈安明,等.对某500 kV开关断口间并联电容器的高压介损诊断及分析[J].电力电容器与无功补偿,2011,32(5):64-67. [26]沈曼盛,周路遥,詹江杨,等.断路器并联电容介质损耗超标分析[J].浙江电力,2018,37(12):82-85. |