[1]聂定珍,曹燕明. HVDC换流站投切交流滤波器用断路器特殊性能要求[J]. 电网技术,2008,32(23):86-90. [2]郭自豪,黄坤鹏,杨涛,等. 800 kV投切交流滤波器用断路器研制[J]. 电工电气,2020(11):36-39. [3]孙龙勇,徐刚,李付永,等. 550 kV滤波器组断路器的研究设计[J]. 高压电器,2020,56(12):67-74. [4]刘振亚.特高压交直流电网[M].北京:中国电力出版社,2013. [5]肖登明,董越,黄东海.我国特高压输电工程的GIS技术[J].高电压技术2006,32(12):115-117. [6] 阳少军,石延辉,夏谷林.一起±800 kV换流站投切交流滤波器用断路器故障原因分析[J]. 电力建设,2015,36(9):129-134. [7]马飞越,相中华,杨伟东,等. 750 k断路器击穿故障的过电压及物理场仿真分析[J]. 高压电器,2022,58(6):186-192. [8]张俊民,王其平,荣命哲.高压SF6自能膨胀式断路器开断小容性电流的数值模拟与介质恢复强度分析[J]. 电工技术学报,2001,16(1):26-30. [9]王尔智,赵中原,曹云东. SF6灭弧室内小容性电流开断的数值模拟[J]. 电工技术学报,2001,16(1):35-38. [10]林莘,李鑫涛,王飞鸣,等. 触头烧损对SF6断路器介质恢复特性的影响[J]. 高电压技术, 2014,40(10):3125-3134. [11]赵中原,高有华,王尔智. SF6压气式灭弧室冷态气流场与介质恢复强度计算[J]. 沈阳工业大学学报,2000,22(4):293-295. [12]王连鹏,王尔智,刘海峰,等. SF6断路器空载介质恢复特性数值模拟中的耦合计算方法[J]. 电工技术学报,2007,22(6):59-64. [13]乔松松,史鑫,耿卫星,等.断路器容性小电流开断性能分析[C]//2016输变电年会.中国电机工程学会,中国电工技术学会.上海.2016:30-38. [14]范敏,汪佳,何智强,等. 1例自能式断路器开断小电流失败故障分析[J]. 湖南电力,2015,35(3):32-34. [15]段中喆. ANSYS FLUENT流体分析与工程实例[M].北京:电子工业出版社,2015. [16]朱红钧,谢龙汉,杨嵩. FLUENT 流体分析工程案例精讲[M].北京:电子工业出版社,2015. [17] 崔景春.气体绝缘金属封闭开关设备[M].北京:中国电力出版社,2016. [18]黎斌.SF6高压电器设计:第4版[M].北京:机械工业出版社,2015. [19]中国电器工业协会.高压交流断路器:GB1984—2003[S].北京:中国标准出版社,2004. [20]林莘.现代高压电器技术:第2版[M].北京:机械工业出版社,2011. |