[1]国家能源局.防止电力生产事故的二十五项重点要求[M].北京:中国电力出版社,2014:128. [2]国家能源局.火力发电厂、变电所二次接线设计技术规程:DL/T 5136—2012[S].北京:中国计划出版社,2013. [3]王松,兀鹏越,孙钢虎,等.电流互感器二次回路端子松动故障分析[J].华电技术,2015,37(4):19-21,24,77. [4]王永年,崔力心,赵红,等.电流回路未接地导致保护误动作实例分析[J].电气自动化,2019,41(4):5-7. [5]王洪林,王光,陈俊,等.一起TA中性线断线导致的差动保护动作分析[C]//中国水力发电工程学会继电保护与励磁专业委员会2021年年会论文集.2021:169-176. [6]卫琳,张健康,粟小华,等.电流二次回路缺陷造成线路保护误动作分析及防范措施[J].电力系统自动化,2019,43(19):194-199. [7]冉茂兵,师刘俊,马运亮.电流二次回路两点接地造成母线差动保护误动作分析及防范措施[J].电工技术,2022(3):62-64,67. [8]李博,孟庆党,赵鸣,等.一起TA两点接地引起的发变组保护误跳闸分析[J].山东电力技术,2015,42(5):74-77. [9]张丽,许红燕,刘明明.电流互感器二次回路两点接地引起零序保护误动[J].电世界,2016,57(4):17. [10]冯顺,曲欣,王毅,等.500 kV主变差动保护误动作事故[J].农村电气化,2017(10):33. [11]刘杰,夏石伟,温英才,等.电流回路接地要求及两点接地案例和防护措施[J].电工电气,2020(9):38-42. [12]刘慧斌,苗茂.电流互感器两点接地引起的线路纵差保护动作分析[J].电气技术,2018,19(1):114-116. [13]陈志峰.典型CT回路两点接地造成保护误动的分析[J].电力科技与环保,2018,34(2):60-62. [14]张惠山,付炜平,周慧寰,等.电流互感器备用抽头误短封引起误差分析[J].河北电力技术,2020,39(3):32-34. [15]李黎峰,翟少磊,沈鑫,等.抽头式电流互感器接线错误对电能计量的影响分析[J].云南电力技术,2017,45(5):56-58. [16]王晓,侯赞,肖萍,等.220 kV变电站电流互感器二次回路异常分析[J].湖南电力,2018,38(4):34-38. [17]齐英伟,刘春晖,杜智超,等.一起电流互感器故障引起的主变压器跳闸分析[J].东北电力技术,2021,42(1):33-35. [18]胡泽鹏,李斌,姚斌,等.3/2接线互感器优化布置的继电保护改进新方法[J].电力系统及其自动化学报,2021,33(3):109-116. [19]张瑞明.一种电流互感器二次回路多点接地在线监测装置及其监测方法的研究[J].山西电力,2021(5):34-37. [20]李雨田,刘婧一,吴尚阳,等.高压互感器现场校验技术分析[J].吉林电力,2022,50(2):51-53. |