[1]江文强,陈欣阳.输电铁塔十字形夹具式主材加固方法研究[J].建筑钢结构进展,2022,24(2):97-104. [2]陈阳,赖林.110kV输变电工程开关站钢结构支架节点静力及疲劳性能分析[J].水电站设计,2018,34(1):50-55. [3]伍鹤皋,高晓峰,傅丹.水电站蜗壳结构研究及应用的回顾与展望[J].水利学报,2021,52(7):770-780. [4]张海楠.在锅炉压力容器压力管道检验中关于裂纹问题的探讨[J].中国设备工程,2021(3):188-189. [5]胡小梅,王汝恒,贾彬,等.碳纤维布补强压力管道试验研究及有限元分析[J].四川建筑科学研究,2015,41(2):91-95. [6]蒋立,王元清,戴国欣,等.负载下焊接加固钢结构压弯构件受力性能的影响因素分析[J].建筑科学与工程学报,2016,33(5):120-126. [7]杨传平.含裂纹缺陷长输管道套管修复研究[D].大连:大连理工大学,2014. [8]杨文强,刘巍,黄正明.钢柱外包混凝土加固在钢框架加固中的应用[J].建筑结构,2018,48(S2):735-740. [9]魏晓斌,雷艳,霍国良,等.水电站压力钢管碳纤维布补强加固试验研究[J].武汉大学学报(工学版),2010,43(6):708-710,718. [10]雷宏刚,付强,刘晓娟.中国钢结构疲劳研究领域的30年进展[J].建筑结构学报,2010,31(S1):84-91. [11]王海涛,张磊,吴刚.CFRP加固含单边裂纹钢板疲劳性能研究[J].建筑结构,2018,48(S2):750-753. [12]李游,李传习,郑辉,等.固化剂混掺对高温下CFRP板-钢板界面黏结性能的影响[J].复合材料学报,2021,38(12):4073-4089. [13]胡春幸,侯玉亮,铁瑛,等.不同胶接参数对CFRP层合板单搭胶接结构强度的影响及优化设计[J].机械工程学报,2021,57(8):154-165. [14]邹田春,符记,李龙辉,等.搭接长度对CFRP单搭接胶接接头拉伸性能及破坏特征的影响[J].材料工程,2021,49(7):158-165. [15]邹田春,符记,巨乐章,等.铺层方式对CFRP-铝合金单搭接胶接接头低速冲击损伤及剩余拉伸性能的影响[J/OL].材料导报,2023(11):1-12(2022-05-27)[2022-09-08].http://kns.cnki.net/kcms/detail/50.1078.TB.20220526.1927.010.html [16]李传习,柯璐,陈卓异,等.CFRP-钢界面粘结性能试验与数值模拟[J].复合材料学报,2018,35(12):3534-3546. [17]Yp A,Gang W B,Hw C, et al. Bond-slip model of the CFRP-steel interface with the CFRP delamination failure[J]. Composite Structures, 2020, 256:113015. [18]He J,Xian G.Debonding of CFRP-to-steel joints with CFRP delamination[J]. Composite Structures, 2016, 153:12-20. [19]李传习,李游,高有为,等.纳米SiO2质量分数对胶粘碳纤维增强树脂复合材料板-钢搭接界面黏结性能的影响[J].复合材料学报,2020,37(10):2619-2635. [20]毛振刚,侯玉亮,李成,等.搭接长度和铺层方式对CFRP复合材料层合板胶接结构连接性能和损伤行为的影响[J].复合材料学报,2020,37(1):121-131. [21]张寒松,龚愉,林文娟,等.铺层角度对CFRP多向层板Ⅱ型分层扩展行为的影响[J].复合材料学报,2022,39(9):4498-4508. [22]中国石油和化学工业协会.胶粘剂 拉伸剪切强度的测定(刚性材料对刚性材料):GB/T 7124—2008[S].北京:中国标准出版社,2008. |